A Dhubri revenue official is accused of using a 2003 sale deed to clear multiple land mutations in 2026. The allegations have triggered calls for an investigation and a wider audit of revenue records.
A suspected land mutation scam has come to light at the Dhubri Revenue Circle Office in Assam, where a Land Revenue Supervisor (LRS) allegedly used a single genuine sale deed registered more than two decades ago to approve multiple land mutations for different buyers.
The official, identified as Nur Islam Sarkar, is accused of exploiting an authentic sale deed executed in 2003 to process separate Namjari (land mutation) applications in 2026. The deed originally related to a specific parcel of land in Kachuarkhash village.
According to the allegations, the same deed number was subsequently used to sanction land mutations for three different purchasers involving separate plots in Jhagrarpar, near Dhubri town, despite the land bearing no connection to the original property covered by the 2003 document.
The alleged manipulation effectively shifted the land records from Kachuarkhash to a different locality while using the same registered deed to facilitate multiple ownership claims. The case has raised concerns over possible tampering with official land records and the safeguards governing archived revenue documents.
The alleged irregularities have also prompted questions over how a single registered sale deed could be used repeatedly without triggering scrutiny within the revenue administration.
Calls have grown for a comprehensive investigation into the land mutations cleared during Nur Islam Sarkar’s tenure, along with a detailed audit of records maintained by the Dhubri Revenue Circle Office to determine whether similar transactions were processed using the same method.
Recruitment Opportunity
WORK TOTALLY OFFICIAL * HIGHLY REPUTED ORGANISATION *
Prosperous Era Media Pvt Ltd *
URGENT MOVE * MALE or FEMALE *
JOB OPENINGS: News Assistant * Researcher * Administrator * Social Media Editor * Events Specialist *
WORK DETAIL: Outdoor work / Action / Adaptability / Persistence
INCOME: Monthly salary 6000 / - to 20000 / -as per work
BENEFITS: Flexible working & enjoyable vacation (your second job)
LOCATION: NER (Distributed nearby)
AGE: 25 to 45 year
EDU: 10th, 12th to any degree
REQUIREMENTS: Strong sense of responsibility / communication and coordination / teamwork *
Fresher and Experienced both can apply *
WARNING: Impolite, distrustful, and malicious doubters are not welcome
Interested person plz send your resume to E-mail: [email protected] / [email protected]
Давно заметил, что правильно подобранный текстиль способен полностью изменить атмосферу комнаты. Особенно интересно смотрятся шторы, изготовленные с учётом конкретного интерьера. Нашёл полезный материал на эту тему: https://meggido.ru/iskusstvo-tekstilnogo-oformlenija-osobennosti-i-bezuslovnye-preimushhestva-poshiva-shtor-na-zakaz/
Need RTL and battery failsafe in writing, not a Discord guess. Failsafe is the page I bookmarked. Set that before you leave the field with GPS.
Need a boat or a rover, not a copter. The wiki I used is Rover docs. Same Mission Planner, different firmware, and the first drive notes are on that page.
Cube Orange plus ArduPilot: I wanted the current firmware, not a random hex. autopilot boards is the page I opened, then Mission Planner to flash it. Same flow for Orange+ and Black.
No need to hunt Copter firmware mirrors. Firmware downloads is the page I use, then Mission Planner to put it on the board. That is enough for a first quad.
GPS has to sit still before the first flight or Loiter is a mess. I used GPS/Compass for the modules and the Mission Planner checks. After a 3D fix the rest of the setup is normal.
Сейчас собираю идеи для обновления домашнего интерьера. Хочется подобрать не просто красивые шторы, а решение, которое будет гармонировать со всей обстановкой. Попалась интересная статья: https://k0r0b0chka.ru/stati/poshiv-shtor-na-zakaz-iskusstvo-sozdanija-idealnogo-interera-i-ego-glavnye-preimushhestva/
This is the main source I use now. Docs, Mission Planner and the vehicle wikis are all on ardupilot.club. If you need Copter, Plane or Rover, take the files there instead of an old dump.
If you are building a quad, a wing or a rover, skip last year’s write-up. The current wiki for all three is on ardupilot.club. I start with Copter or Plane there, not with a cut-down copy.
демонтаж каркасного здания демонтаж старого здания
Pixhawk first run: I followed Pixhawk Overview for the board, then Mission Planner for the firmware and calibration. Do the accel and compass on the bench, not in the grass.
Where do you download Mission Planner now so it matches the firmware? Old forum dumps leave the board half-flashed. I take the ground station from here: Mission Planner. Then I flash Copter or Plane from the same site.
Оформление окна играет гораздо более важную роль в интерьере, чем кажется на первый взгляд. Правильно подобранные шторы помогают расставить акценты и сделать пространство завершённым. Можно ознакомиться с этой публикацией: https://mirzercal.ru/iskusstvo-oformlenija-okna-glubinnye-aspekty-i-preimushhestva-individualnogo-poshiva-shtor/
No need to hunt Copter firmware mirrors. Firmware downloads is the page I use, then Mission Planner to put it on the board. That is enough for a first quad.
Which boards actually run this firmware? The list I used is Choosing an Autopilot. Pixhawk, Cube Orange, Holybro, Matek: same ArduPilot, different hardware.
Which boards actually run this firmware? The list I used is Choosing an Autopilot. Pixhawk, Cube Orange, Holybro, Matek: same ArduPilot, different hardware.
Давно заметил, что правильно подобранный текстиль способен полностью изменить атмосферу комнаты. Особенно интересно смотрятся шторы, изготовленные с учётом конкретного интерьера. Нашёл полезный материал на эту тему: https://meggido.ru/iskusstvo-tekstilnogo-oformlenija-osobennosti-i-bezuslovnye-preimushhestva-poshiva-shtor-na-zakaz/
For Mission Planner on Windows this is the install path I used. The short guide is here: Installing Mission Planner. After that, Connect over USB and load Copter or Plane firmware.
For Mission Planner on Windows this is the install path I used. The short guide is here: Installing Mission Planner. After that, Connect over USB and load Copter or Plane firmware.
Pixhawk first run: I followed Pixhawk Overview for the board, then Mission Planner for the firmware and calibration. Do the accel and compass on the bench, not in the grass.
Where is the current PID write-up, not a three-year-old translation? I needed Autotune and the P/I/D notes for Copter. Found them at Advanced Tuning and that is what I am flying.
Where do you download Mission Planner now so it matches the firmware? Old forum dumps leave the board half-flashed. I take the ground station from here: Mission Planner. Then I flash Copter or Plane from the same site.
Looking for ArduPilot in one place: Mission Planner, firmware and the vehicle wikis. ArduPilot Documentation is the page I send people when they ask where to start.
Mission Planner and the matching firmware have to come from one place or the versions drift. I take both from Mission Planner download and then pick Copter or Plane in Setup.
QGroundControl is fine on a Mac. On Windows I still use Mission Planner. The GCS list I used is Ground Control Stations. Firmware still comes from the ArduPilot wiki either way.
For a first Copter I would not touch PID until the setup is done. First Time Setup is the page I followed: firmware, Mission Planner, compass and radio. After that the first flight notes make sense.
Need a boat or a rover, not a copter. The wiki I used is Rover docs. Same Mission Planner, different firmware, and the first drive notes are on that page.
При выборе штор стоит обращать внимание на то, как они выглядят при дневном и вечернем освещении. От этого во многом зависит общая атмосфера помещения. Дополнительные идеи по текстильному оформлению окон можно посмотреть здесь: https://us620.ru/stati/iskusstvo-svetoteni-jekskljuzivnoe-tekstilnoe-oformlenie-okon-ot-atele-benone/
зайти на кракен http://krakenblogs.info .
Which boards actually run this firmware? The list I used is Choosing an Autopilot. Pixhawk, Cube Orange, Holybro, Matek: same ArduPilot, different hardware.
кракен сайт krakenblogs.info/kraken-chto-eto.php/ .
QGroundControl is fine on a Mac. On Windows I still use Mission Planner. The GCS list I used is Ground Control Stations. Firmware still comes from the ArduPilot wiki either way.
кракен безопасность кракен безопасность .
Мне кажется, правильно подобранные шторы способны полностью преобразить комнату. Особенно интересны решения, в которых сочетаются разные фактуры, плотность тканей и игра света. Нашёл публикацию на эту тему: https://4hl.ru/stati/iskusstvo-svetoteni-jekskljuzivnoe-tekstilnoe-oformlenie-okon-ot-atele-benone/
Mission Planner and the matching firmware have to come from one place or the versions drift. I take both from Mission Planner download and then pick Copter or Plane in Setup.
Who already flashed a Pixhawk, which firmware did you pick so the versions did not drift? I used the board list and the current files at Choosing an Autopilot. You want ArduPilot on that hardware, not a racing profile.
KrakenBlogs.info KrakenBlogs.info .
Попал в реестр рнп? защита от рнп по 223 фз анализ обстоятельств закупки, подготовка документов, составление возражений и защита интересов участника в ФАС. Профессиональное сопровождение на всех этапах рассмотрения дела.
This is the main source I use now. Configurator, firmware and the guides are all on inavflight.net. If you need 9.1, take the files there instead of an old dump.
Кракен Блог Кракен Блог .
кракен ссылка кракен ссылка .
kraken darknet market обзор kraken darknet market обзор .
Which hardware is covered before I buy GPS and a receiver? The board list I used is best flight controllers. FC, GPS, radio, then Configurator for the flash.
GPS has to sit still before the first flight or RTH is a mess. I used GPS setup for the module and the first 3D fix. After that the rest of the setup is normal.
кракен сайт http://krakenblogs.info/istoriya-kraken.php .
зайти на кракен https://krakenblogs.info/ustroystvo-darknet.php .
Мне кажется, правильно подобранные шторы способны полностью преобразить комнату. Особенно интересны решения, в которых сочетаются разные фактуры, плотность тканей и игра света. Нашёл публикацию на эту тему: https://4hl.ru/stati/iskusstvo-svetoteni-jekskljuzivnoe-tekstilnoe-oformlenie-okon-ot-atele-benone/
кракен ссылка http://krakenblogs.info/ .
Наша лучшая подборка: https://rextonhomes.com/agent/aileenmascorro/
Подбирая оформление для квартиры, хочется найти баланс между эстетикой и практичностью. Текстиль на заказ позволяет учитывать особенности окон, освещение и стилистику помещения. Собрал для себя дополнительный материал по этой теме: https://vertinvest.ru/2026/10/23/эксклюзивное-текстильное-оформление/