Tripura Power Minister Ratan Lal Nath on Saturday announced that the state government is reviving the Dumboor power plant to generate 11 Mega Watt (MW) of electricity, as part of a broader shift toward solar energy in response to declining natural gas reserves.

Tripura Power Minister Ratan Lal Nath on Saturday announced that the state government is reviving the Dumboor power plant to generate 11 Mega Watt (MW) of electricity, as part of a broader shift toward solar energy in response to declining natural gas reserves.

Speaking at an awareness camp on the PM Surya Ghar Muft Bijli Yojana in Kailasahar, Unakoti district, Nath underlined that the government’s focus is on preparing for the future while ensuring inclusive development.

“In Dumboor, we used to generate 3 MW, but floods damaged the plant last year. Now, we are working to restore it with a capacity of 11 MW,” the minister said. He cautioned that the state’s dependence on natural gas is becoming unsustainable, with reserves dwindling and affecting power generation at Rukhia, Palatana, Ramchandra Nagar, and Monarchak plants.

Highlighting the importance of renewable energy, Nath said, “Power can be generated from gas, air, water, and the sun. Solar is the future. Under the PM Surya Ghar Muft Bijli Yojana, panels can be installed on rooftops, open land, and almost anywhere. This reduces electricity bills and allows households to earn.”

Launched on February 13, 2024, the scheme seeks to encourage widespread adoption of solar power. Nath said the state aims to install solar panels in 50,000 households, which will collectively generate 150 MW. Tripura currently has about 10 lakh electricity consumers.

The minister stressed that the government is conducting extensive awareness campaigns across the state and urged people to embrace solar energy as a way forward.

“Development must be inclusive and for everyone, regardless of political affiliation,” Nath said, reiterating the government’s commitment to long-term energy security.

×

Recruitment Opportunity

WORK TOTALLY OFFICIAL * HIGHLY REPUTED ORGANISATION *
Prosperous Era Media Pvt Ltd *
URGENT MOVE * MALE or FEMALE *
JOB OPENINGS: News Assistant * Researcher * Administrator * Social Media Editor * Events Specialist *
WORK DETAIL: Outdoor work / Action / Adaptability / Persistence
INCOME: Monthly salary 6000 / - to 20000 / -as per work
BENEFITS: Flexible working & enjoyable vacation (your second job)
LOCATION: NER (Distributed nearby)
AGE: 25 to 45 year
EDU: 10th, 12th to any degree
REQUIREMENTS: Strong sense of responsibility / communication and coordination / teamwork *
Fresher and Experienced both can apply *
WARNING: Impolite, distrustful, and malicious doubters are not welcome
Interested person plz send your resume to E-mail: [email protected] / [email protected]

Recruitment Image
10,303 thoughts on “Tripura to revive Dumboor Plant for 11 MW, push solar push amid gas shortage”
  1. Для успешного продвижения сайта важно выбрать проверенное SEO-агентство. Они предлагают широкий спектр услуг для оптимизации и продвижения сайтов. Особенно популярны в Москве услуги таких агентств, как Net SEO и SEO Partners. Опытные эксперты работают с оптимизацией и SEO продвижением сайтов, помогая бизнесу расти в интернете. Если вы хотите узнать больше, советую поискать по запросу оптимизация сайта франция https://prodvizhenie-sajtov-v-moskve18.ru — там найдёте много полезной информации и отзывы. Не забудьте изучить предложения разных компаний, чтобы выбрать наиболее подходящую для ваших задач. Пусть ваш сайт выйдет в топы благодаря грамотному продвижению!

  2. Need RTL and battery failsafe in writing, not a Discord guess. Failsafe is the page I bookmarked. Set that before you leave the field with GPS.

  3. Where do you download Mission Planner now so it matches the firmware? Old forum dumps leave the board half-flashed. I take the ground station from here: Mission Planner. Then I flash Copter or Plane from the same site.

  4. Подруга детства на приёме в частной клинике. В один голос говорят. Цифровое здравоохранение — это когда все медицинские заключения. Согласие на передачу данных в ЕГИСЗ — тут тоже свои тонкости. Советую глянуть источник: сведения в егисз https://carshopr.ru И про техническую поддержку ЕГИСЗ для больниц. Тем спокойнее будет работать.

  5. ArduPilot and Betaflight are different. Use ArduPilot when you need GPS missions, a plane, a VTOL or a rover. I only take the wiki and the ground station from Copter docs. Old forum copies are not worth it.

  6. Друг детства фельдшером на скорой. Все в один голос говорят. Цифровая медицина — а сейчас без электронного документооборота. Телемедицина врач врач — и каждый медик обязан в этом разбираться. Вся информация доступна здесь: выписка из егисз выписка из егисз Там и про передачу данных в ЕГИСЗ для врачей. Не откладывайте на потом.

  7. Он сказал, что без медицинского журнала. Статьи выходят каждый месяц. Медицинский журнал — И данные, которые можно проверить. А кто-то журнал клиническая медицина. Журнал медицинской психологии — И чтобы статьи были доступны. Можете ознакомиться по ссылке: вестник травматологии вестник травматологии И про требования к статьям для исследователей. Не откладывайте чтение на потом.

  8. Building a wing, not a quad. Plane firmware, first setup and Mission Planner are on Plane docs. I would not flash Copter onto a fixed wing and hope for the best.

  9. Pixhawk first run: I followed Pixhawk Overview for the board, then Mission Planner for the firmware and calibration. Do the accel and compass on the bench, not in the grass.

  10. ArduPilot and Betaflight are different. Use ArduPilot when you need GPS missions, a plane, a VTOL or a rover. I only take the wiki and the ground station from Copter docs. Old forum copies are not worth it.

  11. GPS has to sit still before the first flight or Loiter is a mess. I used GPS/Compass for the modules and the Mission Planner checks. After a 3D fix the rest of the setup is normal.

  12. Pixhawk on the bench, Mission Planner on the PC. The ground station wiki is Mission Planner Home. From there I load Copter firmware and do the first calibration before I bind the radio.

  13. Where is the current PID write-up, not a three-year-old translation? I needed Autotune and the P/I/D notes for Copter. Found them at Advanced Tuning and that is what I am flying.

  14. For a first Copter I would not touch PID until the setup is done. First Time Setup is the page I followed: firmware, Mission Planner, compass and radio. After that the first flight notes make sense.

  15. For a quad this is the Copter wiki I keep open. Firmware, first flight and tuning are linked from ArduPilot Copter. I flash from there, not from a zip on a forum.

  16. Who already flashed a Pixhawk, which firmware did you pick so the versions did not drift? I used the board list and the current files at Choosing an Autopilot. You want ArduPilot on that hardware, not a racing profile.

  17. Where do you get Plane firmware for a wing so Mission Planner matches it? I used Loading Firmware and then Install Firmware in Mission Planner. Copter hex on a plane is a waste of an afternoon.

  18. Нержавеющая сталь 12Х18Н10Т — широко используемая нержавеющая сталь в России и СНГ. За счёт содержания титана сталь не склонна к межкристаллитному разрушению в широком диапазоне температур.

    Характеристики и применение: https://stal-12h18n10t.ru/truba

    Материал используется в энергетике — для изготовления труб, ёмкостей и теплообменников. Эквиваленты по международным стандартам: AISI 321, EN 1.4541 (Европа), SUS 321 (Япония).

  19. GPS has to sit still before the first flight or Loiter is a mess. I used GPS/Compass for the modules and the Mission Planner checks. After a 3D fix the rest of the setup is normal.

  20. This is the main source I use now. Docs, Mission Planner and the vehicle wikis are all on ardupilot.club. If you need Copter, Plane or Rover, take the files there instead of an old dump.

  21. Марка 12Х18Н10Т — востребованный коррозионностойкий сплав в промышленности. Добавка титана в составе сталь не склонна к межкристаллитному разрушению даже после длительного нагрева.

    Характеристики и применение: https://stal-12h18n10t.ru/truba

    Марка востребована в энергетике — при производстве трубопроводов и резервуаров. Зарубежные аналоги: AISI 321, EN 1.4541 (Европа), SUS 321 (Япония).

  22. Марка 12Х18Н10Т — одна из самых популярных марок аустенитной нержавеющей стали на территории постсоветского пространства. Благодаря стабилизации титаном сталь не склонна к межкристаллитному разрушению при эксплуатации в агрессивных средах.

    Состав и свойства: https://stal-12h18n10t.ru/gost

    Материал используется в пищевом производстве — для изготовления труб, ёмкостей и теплообменников. Эквиваленты по международным стандартам: AISI 321, EN 1.4541 (Европа), SUS 321 (Япония).

  23. Intramural teams often have professional-level confidence and very flexible tactics. The Total Frat Move homepage is a starting point for more browsing: https://totalfratmove.com/. A good discussion can be entertaining without everyone agreeing.

  24. Who already flashed a Pixhawk, which firmware did you pick so the versions did not drift? I used the board list and the current files at Choosing an Autopilot. You want ArduPilot on that hardware, not a racing profile.

  25. Сталь 12Х18Н10Т — широко используемая нержавеющая сталь в России и СНГ. Добавка титана в составе обеспечивается защита от МКК даже после длительного нагрева.

    Характеристики и применение: AISI 321 аналог

    Марка востребована в пищевом производстве — при производстве трубопроводов и резервуаров. Эквиваленты по международным стандартам: AISI 321, EN 1.4541 (Европа), SUS 321 (Япония).

  26. Нашёл сайт quick-visa.cc, когда искал, как получить визу в Тайланд для россиян. Очень удобный и понятный сервис, всё расписано по шагам. Кстати, на quick-visa.cc/ru/ можно сразу заполнить анкету онлайн, что экономит кучу времени. У них есть раздел с актуальной информацией по оформлению визы в Таиланд — там всё подробно объясняют, даже если ты в этом совсем не разбираешься. Ещё мне понравилось, что они предлагают помощь с переездом в Тайланд — это особенно удобно для тех, кто планирует надолго. В целом, если искать визовое агентство в Таиланде, то я бы рекомендовал начать с https://quick-visa.cc/ru/, так как там всё чётко и без лишних заморочек.

  27. Been betting with Tenobet since roughly four months on and off, usually spins plus a bit of football action on Saturdays. Honestly, I first joined after someone on another thread sent me a link, and I half expected it to be rubbish.\n\nThe slots side is decent — somewhere around 2,500 games if you count everything. The usual suspects are there: Pragmatic Play, Play’n GO, Microgaming, Betsoft. I live on Book of Dead and Gates of Olympus, though the BTG titles is where I lose the most. Live side is Evolution, which is basically the gold standard — actual dealers, blackjack tables at all hours, plus Crazy Time and Lightning Roulette.\n\nThe welcome thing on Tenobet maxes at ?125 plus a chunk of free spins, and the wagering was 35x on the bonus which is nothing scandalous but read it properly. There’s no no deposit freebie unless I missed it, you need ?10 to trigger it. If you want the current terms they’re listed on tenobet online casino rather than trusting my memory. The one thing that annoyed me: the spins expire in 7 days and I lost half of mine to being busy.\n\nWithdrawals are the bit I actually care about. E-wallet took roughly 18 hours the two times I tried, card took three working days, which is normal for UK banking. You also get Neteller, Visa and some crypto options, but I’ve never used crypto on a bookie. KYC was painless enough — driving licence and a bank statement, cleared overnight.\n\nThere’s no standalone app that I found, it’s a browser version which honestly works — I use it more than desktop now. Live chat at Tenobet answered in a few minutes when I asked about a stuck bonus, human, not a bot loop. It’s UKGC licensed, which is the first thing I check these days.

Leave a Reply

Your email address will not be published. Required fields are marked *